Configuration – Lenze EVF9383 User Manual
Page 256
Configuration
Function blocks
Internal motor control with vector control (MCTRL2)
8.2
8.2.7
l
8.2−40
EDSVF9383V EN 7.1−04/2012
8.2.7
Internal motor control with vector control (MCTRL2)
The function block MCTRL2 controls the motor. Since it is always executed,
it does not need to be entered into the processing table.
Compared with the V/f characteristic control the vector control (C0006 = 1)
has a much higher torque efficiency at the same motor current. The motor
is monitored and controlled via an internal motor model. This serves to
achieve an optimum operating behaviour of the motor at any time.
The vector control can be used for single drives, asynchronous motors and
multi−motor drives of the same type with rigid coupling.
1
0
C0105
+
+
-
C0070
C0071
+
1
0
C0022
C0081
C0087
C0088
C0089
C0090
C0091
PWM
MCTRL-N-SET
VECT-CTRL
MCTRL-NSET2
MCTRL2
C0906/1
MCTRL-MSET2
MCTRL-N/M-SWT
1
0
MCTRL-HI-M-LIM
MCTRL-LO-M-LIM
C0050
C0018
C0086
MCTRL-MMAX
MCTRL-IMAX
±100%
C0056
C0054
MCTRL-I-SET
C0906/5
MCTRL-I-LOAD
C0907/4
MCTRL-QSP
C0907/3
C0907/2
C0906/3
C0906/4
C0893
C0892
C0899
C0900
C0902
C0901
C0890
MCTRL-QSP-OUT
DCTRL-QSP
MCTRL-DCVOLT
C0042
+
C0497
MCTRL-IACT
MCTRL-GSB
C0905
C0904
C0107
C0019
MCTRL-GSB-OUT
C0023
C0021
QSP
C0906/2
MCTRL-M-ADD
C0891
Auto-GSB
C0143
MCTRL-VACT
MCTRL-FACT
MCTRL-IXT
MCTRL-MACT
C0036
MCTRL-BOOST
C0906/6
C0903
C0092
C0898
C0912
C0085
C0084
C0082
C0148
C0234
C0235
C0053
C0052
C0064
C0058
C0075
C0076
KTY
MCTRL-M-TEMP
C0063
speed control
C0236
C0909
MCTRL-VP-N-ADAPT
C0911
C0910
n.c.
MCTRL-NACT
MCTRL-PHI-ACT
MCTRL-PHI-ANA
CONST
MCTRL-PHI-ANG
C0051
C0011
Encoder
1
C0025
X8
C0420
X9
C0421
1
>
–
1
>
–
fb_mctrl2_01
Fig. 8.2−19
Internal motor control with vector control (MCTRL2)
Description