Lenze EVF9383 - Manual (Page 123)

Selection of the correct operating mode 6.2
l
6.2−1 EDSVF9383V EN 7.1−04/2012
6.2 Selection of the correct operating mode
The control mode of the controller can be selected via the operating mode.
You can select between the following modes:
ƒ V/f characteristic control
ƒ Vector control
The V/f characteristic control is the classic operating mode for standard
applications.
When using the vector control you will achieve improved drive features
compared to the V/f characteristic control due to:
ƒ Higher torque via the complete speed range
ƒ Higher speed accuracy and higher concentricity factor
ƒ Higher efficiency
M
n n
N
M
N
‚

8200vec524
Fig. 6.2−1 Comparison of V/f characteristic control and vector control
 V/f characteristic control
‚ Vector control
Description
Selection of the correct
operating mode