Lenze EVF9383 User Manual
Page 128
Advertising
![background image](/manuals/566197/128/background.png)
Parameter setting with the XT EMZ9371BC keypad
Commissioning example in V/f characteristic control mode
6.3
6.3.1
l
6.3−4
EDSVF9383V EN 7.1−04/2012
Note
Switch−on sequence
28.
The drive is running now
CW rotation:
X5/E1 = HIGH and X5/E2 = LOW
CCW rotation:
X5/E1 = LOW and X5/E2 = HIGH
If the drive does not start, press
U in
addition
(see chapter "Commissioning"
®
"Acceleration, deceleration, braking,
stopping")
)
Note!
In the "Diagnostic" menu you can monitor the most important
drive parameters
Advertising