Check the controlnet module status, Click the connection manager tab – Rockwell Automation 1756-RMxx ControlLogix Enhanced Redundancy System User Manual User Manual
Page 197
Advertising
![background image](/manuals/579196/197/background.png)
Rockwell Automation Publication 1756-UM535D-EN-P - November 2012
197
Monitor and Maintain an Enhanced Redundancy System
Chapter 8
Check the ControlNet Module
Status
After you have programmed your redundant system and configured your
ControlNet network, check two statistics specific to your ControlNet modules.
These statistics include the CPU usage and the connections used.
To view the CPU usage and the number of connections used, complete these
steps.
1. In RSLinx Classic software, open the Module Statistics for the ControlNet
module.
2. Click the Connection Manager tab.
Advertising