Click the redundancy tab – Rockwell Automation 1756-RMxx ControlLogix Enhanced Redundancy System User Manual User Manual
Page 202
Advertising
![background image](/manuals/579196/202/background.png)
202
Rockwell Automation Publication 1756-UM535D-EN-P - November 2012
Chapter 9
Troubleshoot a Redundant System
3. If further information is required, click Controller Properties.
4. Click the Redundancy tab.
5. If controller fault details are needed, click the Major Faults and Minor
Faults tabs to view fault types and codes.
Advertising