Bio-Rad ChromLab™ Software - Manual (Page 169)

Creating a Method from Standard Phases
User Guide | 167
2. Choose a fluidic scheme that matches your NGC instrument configuration and
click Select.
Note: General settings appear in the Phase Parameters pane when you select
the Method Settings phase. General settings vary depending on the fluidic
scheme selected. For more information, see Fluidic Scheme on page 125 .
To specify general settings
1. In the Phase Parameters pane, click Run Name and specify a name in the
dialog box for the run that will result, and then click OK.
2. (Optional) Click Notes and enter or edit content in the Notes dialog box that
appears. Once the new method is saved, text entered here appears in the
Notes tab of the new method’s Open Method dialog box.
3. Under Column Selection, select a technique on the Show By Technique
dropdown list. This filters the list of column types.
4. Select a column type on the Column Type dropdown list.
ChromLab automatically fills in the column’s volume and pressure settings.
Tip: Click Column Properties to view a complete list of the selected
column’s properties and values.