Bio-Rad ChromLab™ Software - Manual (Page 33)

System Control Window
User Guide | 31
File Menu Commands
Connect to System — connects your computer to the NGC system if it is not
already connected. In the dialog box that appears enter the DNS name of the NGC
system and click Connect.
Disconnect System — when you start ChromLab, you are automatically logged in
to the NGC system to which your computer is connected. This command enables
you to disconnect ChromLab software from that system so you can work offline.
System Settings — opens the System Settings dialog box in which you can
customize system settings. See System Settings on page 69 for more information
about customizing your system.
System Information — opens the System Information dialog box, which lists the
serial number and other general information about the NGC device as well as
information about the system components, processes, and UV and UV/Vis
detectors. See System Information on page 86 for more information.
Preferences — opens dialog boxes in which you can do the following:
 Select pressure units for all system and software pressure values. This is a
global setting.
 Set up an SMTP server to send email messages about system notifications
from the ChromLab computer. See Preferences on page 89 for more
information about setting up an SMTP server.
Exit — closes ChromLab.
8 The Fluidic Scheme pane depicts graphically how modules are configured and
plumbed for an experiment.
L EGEND