Bio-Rad ChromLab™ Software User Manual
Page 256
7
| Evaluating Results
254
| NGC Chromatography Systems and ChromLab Software
4.
In the section, enter the values for bed height and particle diameter to calculate
N/L, HETP, or rHETP.
Tip:
For predefined columns, you can change the prepopulated values for
bed height and particle diameter in this section without changing the
values in the Method Editor.
5.
Click Apply to calculate the selected column performance statistics and display
them in the table.
Tip:
You can include the column performance statistics in the Run report.
See
for information about creating Run reports.
Resetting the Column Performance Properties
To reset the properties to their default values
Click Reset to reset the properties checkboxes to their default values.
Deleting Column Performance Data
To delete column performance data for the displayed trace
Click Delete.
Note:
This also removes the Column Performance table.