Bio-Rad ChromLab™ Software - Manual (Page 225)

Comparing Traces
User Guide | 223
Offsetting Traces — Overlay Mode
When two or more traces from different runs are too close together to distinguish,
Offset can be used to shift traces so you can view them separately. Traces from the
first run remain in their original locations. Traces from other runs are shifted. If more
than two runs are involved, each additional run has its own offset. The last run in the
list is shifted the most.
Note: Offsetting the y-scale of a trace does not change trace values.
To offset a trace
 With two or more runs displayed in the Evaluation window, use the Offset slider
at the left side of the chromatogram to select an offset number from 0–100, with
0 meaning no offset and 100 meaning maximum offset.
Offset changes appear in the chromatogram as you move the slider.