Using the scouting wizard to scout columns – Bio-Rad ChromLab™ Software User Manual
Page 187
Scouting on Parameters within a Method
User Guide
| 185
Run Name — the scout run name. The autogenerated name is based on
the parameter you chose on Page 1 of the scouting wizard and the scout
starting value and increment value. This field is editable.
Tip:
To edit the run name column easily, create a list in Microsoft Word or
Excel. Copy and paste the list into the column to replace the
autogenerated names.
<Parameter> — the value of the scouted parameter for that run based on
the starting value in the base method and the increment value. This field is
editable.
Include in Scout Sequence — determines whether the run is included in
the scout method. By default, all runs are included. This field is editable.
Using the Scouting Wizard to Scout Columns
This section explains how to set up pages 2 and 3 of the scouting wizard when
scouting columns.
Note:
This section applies only if you chose to scout columns on Page 1. Refer
to the images in the previous section if you chose another parameter to scout.
Page 2: