Bio-Rad ChromLab™ Software - Manual (Page 190)

6 | Creating a Method
188 | NGC Chromatography Systems and ChromLab Software
include a preinjection sample pump wash, the method is updated and you
proceed to Page 3. If you click No in the message box (if, for example, you are
using the same sample), the method is not updated and you proceed to Page
3.
Page 3:
On this page you can name each run and include or exclude a sample in the scout
sequence. The scout sequence table comprises the following columns:
 Run # — the scout run number. This field is not editable.
 Run Name — the scout run name. The autogenerated name is based on
the sample inlet valve module number and the port number on that valve.
This field is editable.
Tip: To edit the run name column easily, create a list in Microsoft Word or
Excel. Copy and paste the list into the column to replace the
auto-generated names.
 Sample Port Position — this field is not editable.
 Injection Volume (ml) —this field is not editable.