Bio-Rad ChromLab™ Software - Manual (Page 262)

8 | Importing and Exporting Data
260 | NGC Chromatography Systems and ChromLab Software
To import a method or run
1. In the Home, Method Editor, or Evaluation window, select File > Import and
choose NGC File.
The Import NGC File dialog box appears.
2. Click Select. In the Select Project dialog box, do one of the following:
 Choose a destination project for the method or run and click Select
Project.
 Rename a project using the appropriate project button at the top of the
dialog box and select the project to rename. Click Select Project.
 Create a new sub- or root project and click Select Project.
3. In the Import NGC File dialog box, click Browse to display the Open dialog box.
4. Select the method or run file to import and click Open.
Tip: To import multiple methods or runs at once, hold down Ctrl or Shift
and select each file.
5. (Optional) In the Name box, type another name for the method or run.
Note: This option is not available if you selected multiple methods or runs
to import.