Bio-Rad ChromLab™ Software - Manual (Page 173)

Renaming Phases
User Guide | 171
3. Repeat steps 1 and 2 until you have finished editing phase settings for the
method.
4. Save the method to preserve your changes.
Note: Changes you make in the phase parameters to the duration of flow
steps and salt gradients are graphically depicted in the Gradient Graph
pane. Conversely, changes you make to the gradient graph are reflected in
the phase parameters.
Renaming Phases
You cannot rename phases in the Phase Library pane. Renaming a phase in the
Method Outline pane changes its name only for the current method. However,
renamed phases can be saved as custom phases for use in other methods.
Note: You cannot rename the Method Settings phase.
To rename a phase in the Method Outline pane
1. In the Method Outline pane, select the phase to rename.
2. Do one of the following:
 Select Edit > Rename Phase.
 Right-click the selected phase and select Rename Phase.
 Press F2.
The Rename Phase dialog box appears.
3. Edit the name of the phase and click Save.
Rearranging Phases
To rearrange phases in a method
1. Select a phase in the Method Outline pane.
2. Drag the phase to a new position.