Bio-Rad ChromLab™ Software - Manual (Page 186)

6 | Creating a Method
184 | NGC Chromatography Systems and ChromLab Software
checkbox is also cleared. The other steps remain selected and will be
included in the scout.
Page 3: Generate Scout Sequence
On this page you set the number of runs to be performed, name each run, and set
the parameters for the scouted steps.
 Number of runs — sets the number of runs to be performed as part of the
scout experiment.
 Starting Value — sets the starting value for the parameter chosen to be
scouted. The default is the starting value in the base method.
 Increment Value — sets the scout run increment values. The scout
increment value can be positive or negative.
The scout sequence table comprises the following columns:
 Run # — the scout run number. This field is not editable.