Bio-Rad ChromLab™ Software User Manual
Page 188
6
| Creating a Method
186
| NGC Chromatography Systems and ChromLab Software
On this page you can select up to five columns for each column-switching valve to
scout. The column dropdown list comprises all columns in the column library,
including user-defined columns (see the section
To add user-defined columns on
for information about user-defined columns). The wizard displays the
values for column volume, maximum precolumn pressure, and maximum delta-
column pressure for each selected column.
Alternatively, you can choose Custom from the dropdown list and modify these
values to create a custom column to scout.
Page 3:
On this page you can name each run and include or exclude a column in the scout
sequence. The scout sequence table comprises the following columns:
Run # — the scout run number. This field is not editable.
Run Name — the scout run name. The autogenerated name is based on
the column’s position on the column switching valve module and the name
of the column chosen on Page 2. This field is editable.
Tip:
To edit the run name column easily, create a list in Microsoft Word or
Excel. Copy and paste the list into the column to replace the
autogenerated names.