Bio-Rad ChromLab™ Software - Manual (Page 177)

Running a Method and Collecting Fractions
User Guide | 175
To run a method
1. Open the method to run.
2. On the toolbar, click Start Run. The Schedule Run dialog box appears.
3. (Optional) Type a name for the run. The run name can consist of up to 85
characters.
4. To begin the run immediately, click Start Run.
To add runs to the run queue
1. In the Method Editor click Start Run. The Schedule Run dialog box appears
displaying a message that the method will be run after all runs currently in the
queue are completed.
2. Click Schedule Run. The method is added to the end of the run queue in
System Control.