Bio-Rad ChromLab™ Software - Manual (Page 34)

3 | System Control
32 | NGC Chromatography Systems and ChromLab Software
View Menu Commands
Show Chromatogram — displays a chromatogram of the current run data. Clearing
this command hides the chromatogram from view.
Show Fluidics — displays the fluidic scheme. Clearing this command hides the
fluidic scheme from view.
Manual Menu Commands
Enter/Exit Manual Mode — toggles ChromLab between manual and automatic
modes.
Save Recorded Manual Run — in manual mode, saves in a data file the steps
executed during a manual run.
Clear Recorded Data — deletes manual run data from the display.
Tools Menu Commands
Calibrate — opens the Calibration dialog box, which displays instructions and
settings for selecting a module and calibrating it. See Calibrating a Module on
page 64 for details.
Point-to-Plumb — starts the Point-to-Plumb feature and simultaneously turns off
instrument LED lights so you can visually verify port locations during instrument
plumbing. Displays the current fluidic scheme. Gray lines indicate the flow path.
Clicking a line in the window turns on LED lights on the instrument corresponding to
ports to be connected. See Verifying Plumbing with the Point-to-Plumb Feature on
page 67 for details.
Change Fluidic Scheme — opens the Fluidic Scheme Selector dialog box in which
you can edit the fluidic scheme or choose another one. See Fluidic Scheme
Configurations on page 51 for details.