Bio-Rad ChromLab™ Software - Manual (Page 206)

7 | Evaluating Results
204 | NGC Chromatography Systems and ChromLab Software
Selecting the Active Trace
When a trace is selected, it appears bolded, the row corresponding to the trace is
selected in the trace table, and the primary y-axis (on the left of the chromatogram)
changes to the units and scale of the trace. For example, when UV is selected, the
units and scale of the y-axis display as mAU.
Note: The secondary y-axis (on the right side of the chromatogram) does not
change when you select the active trace. See Changing the Axes on page 205
for information about changing its axes.
To select a trace
 Do one of the following:
 Click the trace in the chromatogram.
 Click the trace item in the legend.
 Select a row in the trace table.