Daktronics Venus 1500 Ver 3.x - Manual (Page 164)

Venus 1500 Real-Time
Tutorial
150
To view advanced RTD, follow the directions below:
1.
Open the Edit menu.
2. Select Inputs > Edit.
3. In the Input Properties window, click the Advanced>> button for more RTD
configuration options. Refer to Figure 181.
The following descriptions are the available options in viewing Advanced RTD:
Run Message determines whether the playlist of the target display or group is
cleared when an Enhanced RTD Start Sequence command is received on the input. If
checked, the playlist will be cleared. If unchecked, the message will be appended to
the current playlist.
Select Frame is for Version 2 displays only. Click the Configure button and the
ERTD Select Frame Setup will open. Type in the message name in the Message
Name field that corresponds to the Enhanced RTD Select Frame number that will be
received on the Input. Click OK to complete the action. Click Cancel to void the
action and close the window. Refer to Figure 182.
Figure 181: Input Properties Window