Daktronics Venus 1500 Ver 3.x - Manual (Page 41)

The Venus 1500 Administrator 27
Tutorial
A group of displays is a collection of displays of the same display type that can receive Venus
1500 commands simultaneously. This option can be used to send the same message(s) at the
same time to more than one display of the same type. A group is not required for sending data to
the display.
NOTE: Display types must be configured and displays added before this option can be used.
To create a new group:
1. From the Edit menu, select New > Display Group. The Display Group Configuration
dialog box appears. Refer to Figure 33.
Figure 33: Display Group Configuration
2. Enter a name for the group in the Description field.
3.
Select the group’s display type. A list of available displays appears in the left half of the
dialog box.
4.
Highlight the display(s) to be included in the group and click Add>>. The display(s)
are added to right column called Member Displays.
5. To remove a display, highlight the name under Member Displays and click
<<Remove.
6.
Click OK to save the display group or choose Cancel to discard all settings and exit the
dialog box