Tcp/ip connection, Figure 23: tcp/ip network configuration, Figure 24: tcp/ip network configuration box – Daktronics Venus 1500 Ver 3.x User Manual
Page 34
The Venus 1500 Administrator
Tutorial
20
Click the Network Configuration button
located near the top of the Venus
1500 Administrator screen.
1.
Right-click TCP/IP Networks on the left side of the Network Configuration screen.
2.
Click New…
3.
Enter a name for the new network in the Network Name field. Refer to Figure 24.
4.
Enter the TCP/IP address or fully qualified DNS name for the serial server. If an IP
address is being used, ensure the period marks appear between each set of numbers in
the address.
5.
If a serial server socket is 3001, leave the Use Default checked. Otherwise, uncheck Use
Default and enter the socket number in the corresponding box.
6.
Click OK to save the new network and close the Network Configuration.
Figure 23: TCP/IP Network Configuration
Figure 24: TCP/IP Network Configuration Box