Metric Halo Mobile I/O - Manual (Page 122)

ULN/LIO-8 Front Panel Guide
122
Figure 9.18: Front Panel Preference Sheet
The options are:
• Input Links matrix
Allows you to link input channel encoders (more info in the Link mode section).
• Output Links matrix
Allows you to link output channel encoders (more info in the Link mode section).
• Front Panel Brightness
Scales the brightness level of the front panel (more info in the Illumination adjustment section).
• Front Panel Normal Intensity
Sets the maximum illumination level; the brightness scales to this point.
• Numeric Hold Time
The time in seconds that the meters display numeric levels after adjusting an encoder.
• Clip Hold Time
The time in seconds that the meter LEDs stay red after clipping occurs.
• Input Clip Threshold
The input level at which a signal is considered clipped.
• Output Clip Threshold
The output level at which a signal is considered clipped.
• Front Panel Knob Gain Steps
Normal: The amount of gain change per encoder click when not pushed in.
Pushed In: The amount of gain change per encoder click when pushed in.
• Enable IR Remote
Enables the infrared remote receiver on the selected unit's faceplate.
• Edit IR…
This button will open the Infrared Remote Preferences pane.