Metric Halo Mobile I/O - Manual (Page 58)

2882 Users Guide
58
Figure 5.5: 30” IEEE 1394 9-pin to 6-pin 1394 Cable
• One 4.5 meter IEEE 1394 9-pin to 6-pin FireWire Cable
Figure 5.6: 4.5 meter IEEE 1394 9-pin to 6-pin 1394 Cable
• Two Rack Ears w/ fasteners
Figure 5.7: Rack Ears
• MIO Software CD-ROM
• Warranty/Registration Card
If any of these items are missing from your package when you open it, please contact Metric Halo or your
dealer immediately for assistance.
6-pin to 6-pin IEEE 1394 cables are available from MH Direct .
Using the 2882 Hardware
2882 Front Panel
Figure 5.8: 2882 Front Panel
The 2882 front panel provides ten-segment metering for the 8 analog inputs and outputs. The meters are fast
PPM peak reading meters with auto-resetting peak holds.
The front panel also provides 2882 system status at a glance:
• Sample Rate (nominal 44.1, 48, 88.2, or 96)
• The Sample Rate is determined from the currently selected clock source so it will accurately indicate
the current sample rate, even when the clock source is being provided by an external device.
• Clock source:
• Internal indicates that the system is internally clocked
• Wordclock indicates that system is being clocked from the wordclock input
• 256x WC indicates that the system is being clocked from a 256x clock at the wordclock input
• Digital In indicates that the system is being clocked from the selected digital input (AES or S/PDIF)
• Power — Indicates that the 2882 is receiving power.