Metric Halo Mobile I/O - Manual (Page 293)

+DSP
293
Invert
{Off, On}
When enabled, inverts the delayed signal relative to the input polarity.
Master Bypass
{On, Off}
Table 20.10. Multitap delay times
Plug-in version Delay (samples) Delay (ms)
Short 1024 21
Medium 24000 500
Long 96000 2000
MIOAllpass
• Synopsis: First Order Allpass Filter
• Category: Phase EQ, Building Blocks
• Channels: 1
Description:
MIOAllpass provides an adjustable high-order all-pass filter. When the
Coeff
is 0, the filter acts as a
pure single sample delay. As the
Coeff
is adjusted away from 0, the phase shift becomes more and
more non-linear as a function of phase. The MIOAllpass can be used to implement a phase equalizer
and is also useful as a reverb building block.
Parameters:
Coeff
[-1, 1] s
Sets the coefficient of the of the all-pass filter.
See also:
MIOAllpassVD
MIOAllpassVD
• Synopsis: Variable Delay First Order Allpass Filter
• Category: Phase EQ, Building Blocks
• Channels: 1
Description:
MIOAllpassVD provides an adjustable high-order all-pass filter. When the
Coeff
is 0, the filter acts
as a pure delay, with the delay time set by
Allpass(samp)
. As the
Coeff
is adjusted away from 0,
the phase shift becomes more and more non-linear as a function of phase. The MIOAllpassVD can be
used to implement a phase equalizer and is also useful as a reverb building block.
Parameters:
Coeff
[-1, 1] s
Sets the coefficient of the of the all-pass filter.
Allpass(samp)
[0, 255] samps
Sets the delay time of the pure-delay portion of the allpass filter. This parameter is in samples.
See also:
MIOAllpass