Metric Halo Mobile I/O - Manual (Page 320)

MIO Console Key Commands
320
Some of the key-commands depend upon whether or not you are running MIO Console in legacy mode. In
Legacy Mode, there are 5 Panels in the MIO Console window, whereas if you disable legacy mode there are
only 5 Panels in the MIO Console window.
Table A.2. Pane Select Key Commands in 2d Expanded Mode
Command Key Sequence
Select Pane: I/O Control ⌘1 (Command + 1)
Select Pane: +DSP ⌘2 (Command + 2)
Select Pane: Recording ⌘3 (Command + 3)
Table A.3. Pane Select Key Commands in Legacy Mode
Command Key Sequence
Select Pane: I/O Control ⌘1 (Command + 1)
Select Pane: Mixer ⌘2 (Command + 2)
Select Pane: Routing ⌘3 (Command + 3)
Select Pane: +DSP ⌘4 (Command + 4)
Select Pane: Recording ⌘5 (Command + 5)
MIO Console also provides many key-commands via the menus; these commands cannot be edited:
Table A.4. Menu Key Commands
Command Key Sequence
MIO Console > Preferences ⌘, (Command + comma)
MIO Console > Hide ⌘H (Command + H)
MIO Console > Hide Others ⌘⇧H (Command + Shift + H)
MIO Console > Quit ⌘Q (Command + Q)
File > Open ⌘O (Command + O)
File > Template ⌘⇧O (Command + Shift + O)
File > Close ⌘W (Command + W)
File > Save ⌘S (Command + S)
File > Save As ⌘⇧S (Command + Shift + S)
Edit > Undo ⌘Z (Command + Z)
Edit > Redo ⌘⇧Z (Command + Shift + Z)
Edit > Cut ⌘X (Command + X)
Edit > Copy ⌘C (Command + C)
Edit > Paste ⌘V (Command + V)
Edit > Select All ⌘A (Command + A)
Recording > Set Record Folder ⌘T (Command + T)
Recording > Set Playback Folder ⌘Y (Command + Y)
Recording > Recording Preferences ⌘R (Command + R)
Mixer > Create New Mono Mixer Strip ⌘⇧N (Command + Shift + N)
Mixer > Create Multiple Mixer Strips ⌘⇧M (Command + Shift + M)