Metric Halo Mobile I/O - Manual (Page 56)

56
5. 2882 Users Guide
2882 Overview
Figure 5.1: Mobile I/O 2882
What it is
Mobile I/O is a portable, high–quality, modular FireWire–based multi-format audio converter, interface, and
processor for professional audio applications. The 2882 model line is equipped with eight balanced analog
inputs (4 on XLR and 4 on 1/4" TRS), two channels of Digital I/O (AES/EBU and S/PDIF), eight channels of
ADAT® optical I/O support (switchable to 2 channel TOSLINK), and eight balanced analog outputs (1/4" TRS),
as well as wordclock in/out and 2 IEEE 1394 FireWire connectors that support 400 Mbs operation. All inputs
and outputs are capable of 24-bit/ 96kHz operation.
What it has
• 18 simultaneous input channels and 20 simultaneous output channels
• full 24 bit/96kHz audio
• 8 independent channels of mic-pre with switchable phantom power
• Fully Portable Capabilities – Bus and Battery Powerable
• Rack Mount Kit
• 44.1, 48, 88.2, 96kHz Sampling Rates
• 24 bit 110 dB Dynamic Range A/D converters
• 24 bit 120 dB Dynamic Range D/A converters
• 8 Balanced Analog Inputs – 4 XLR, 4 TRS 1/4"
• 8 Balanced Analog Outputs – 8 TRS 1/4"
• Selectable stereo Digital Inputs AES/EBU or S/PDIF
• Stereo Digital Outputs AES/EBU and S/PDIF
• 8 ADAT® Optical Inputs and Outputs (or 2 TOSLINK)
• Sample Rate Conversion (SRC) on Digital I/O
• Built-in 80-bit, fully interpolated, multi-bus mixer for near-zero latency foldback of all input channels
and all DAW busses simultaneously
• Full cross point router for I/O management
• Word Clock 1x, 256x
• Front Panel Metering for Analog Inputs and Outputs
• Full console metering of every channel and mix bus
• Total recall of every console parameter
Options (can be installed before or after purchase)
• +DSP license