Metric Halo Mobile I/O - Manual (Page 181)

MIO Console Overview
181
Latency in the I/O Insert
Using the I/O insert incurs the following latencies:
• When using an analog send/return to insert an external device on a 2882 or ULN-2, there will
be 74 samples of latency
• When using an analog send/return to insert an external device on a LIO-8 or ULN-8, there will
be 116 samples of latency
• When using FireWire to insert a plug-in hosted on your computer, there will be latency of double
the host buffer size plus 66 samples
Most hosts offer delay compensation for inserts, please consult their documentation for more info.
Master Strip Details
Master Strips are used to control the signal processing and output routing for mix busses. Rather like the Input
Strips, they provide Character, Direct Outs, Inserts, and Mute controls. They also provide a very flexible strip
output routing pop-up that allows you to route the output of the processed mix bus to any specific output path,
mult it to many output paths, or to assign it to the Monitor Controller.