I.12. db25 connector board (interior), 348 i.13. phantom power jumpers on the psu board – Metric Halo Mobile I/O User Manual
Page 348
Advertising
ULN-R Installation Guide
348
Figure I.12: DB25 Connector Board (Interior)
6. Remove the jumpers from J8 and J9 on the power supply board at the front of the LIO:
Figure I.13: Phantom Power Jumpers on the PSU Board
7. Connect the phantom power cable between connector J5 on the DB25 connector board to connector
J5 on the power supply board at the front of the LIO:
Advertising