Nortel Networks Circuit Card 311 - Manual (Page 1011)

Configuration 1011
Prompt Response Description
BTID
(See
page 803 .)
Xx Enter the country busy tone ID:
Tortola, Brazil = 10
Mexico = 10 or 08 (depending on CO)
Singapore = 11
Ireland = 3 or 9 (depending on CO)
Chile, Venezuela, Thailand, Korea =
06. Argentina = 12 or 07, Turkey = 14
SUPN (NO) YES Supervision yes (no)
STYP BTS Busy tone supervision enabled
BAT Loop break supervision enabled
CLS (LOL) SHL Attenuation Pads In, (Out)
DTN, (DIP) Digitone signaling, (digipulse)
P20, P12, (P10) Make-break ratio for pulse dialing
speed.
Note: These prompts are required only for the first unit defined on each
NTCK16AX card.
PPIDFreqMin pulse detection
0316Kz>70ms
0412Kz>70ms
CountryBTIDCadence
Brazil, Tortola10250 ms +/- 50 ms on/off
Mexico10250 ms +/- 50 ms on/off
Mexico 8375 ms on/off
Singapore11750 ms on/off
Ireland 3500 +/- 50 ms on/off
Ireland 9375 - 750 ms on/off
Kuwait, Chile 6500 +/- 50 ms on/off
Venezuela, Indonesia12300 ms on, 200 ms off
Thailand, Korea12300 ms on, 200 ms off
Argentina12300 ms on, 200 ms off
Argentina07250 - 500 ms on/off
Turkey1410 seconds of Tone 1:
200 ms off, 200 ms on; 200 ms off,
200 ms on; 200 ms off, 200 ms on;
200 ms off, 600 ms on; followed by
Tone 2: 200 ms off, 200 ms on.
NTCK16BX Central Office trunk card
Route Data Block
Respond to the prompts in LD 16 as shown:
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.