Nortel Networks Circuit Card 311 - Manual (Page 13)

13
New in this release
This technical document provides information about circuit cards for the
CS 1000 Release 5.5. Non-supported circuit cards have been deleted
from the document.
Other
Revision History
June 2008 Standard 01.04. This document has been up-issued to include information in
the
"Jumper and switch settings" (page 528) section.
February 2008 Standard 01.03. This document has been up-issued to reflect changes in
technical content for CR Q01396373-01.
December 2007 Standard 02.05. This document has been up-issued to support
Communication Server Release 5.5.
June 2007 Standard 01.02. This document has been up-issued to reflect changes in
technical content for CoreNet shelf supporting CP PII and CP PIV function.
May 2007 Standard 01.01. This document is up-issued to support Nortel
Communication Server 1000 Release 5.0. This document contains
information previously contained in the following legacy document, now
retired, Circuit Card (553-3001-211).
August 2005 Standard 3.00. This document is up-issued to support Nortel Communication
Server 1000 Release 4.5.
September 2004 Standard 2.00. This document is up-issued for Nortel Communication Server
1000 Release 4.0.
October 2003 Standard 1.00. This is a new technical document for Succession 3.0. It
was created to support a restructuring of the Documentation Library, which
resulted in the merging of multiple legacy technical documents. This new
document consolidates information previously contained in the following
legacy documents, now retired:
• Line Cards: Description (553-3001-105)
• Trunk Cards: Description (553-3001-106)
• Serial Data Interface Cards: Description (553-3001-107)
• NT7D16 Data Access Card: Description and operation (553-3001-191)
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.