Nortel Networks Circuit Card 311 User Manual

Page 923

Advertising
background image

923

NTAK79 2.0 Mb PRI card

Contents

This section contains information on the following topics:

"Introduction" (page 923)

"Physical description" (page 924)

"Functional description" (page 932)

"Architecture" (page 933)

Introduction

The NTAK79 2.0 Mb Primary Rate Interface (PRI) card provides a 2.0 Mb
interface and an onboard D-channel handler (DCH). The NTAK79 card
also includes an onboard clock controller (equivalent to the NTAK20 Clock
Controller) that can be manually switched into or out of service.

The NTAK79 card does not support the NTBK51 downloadable D-channel
handler daughterboard.

You can install this card in slots 1 through 4 in the Media Gateway. The card
is not supported in the Media Gateway Expansion.

Note: Up to three four trunk cards are supported in each Media
Gateway.

ATTENTION

IMPORTANT!

Each Media Gateway that has a digital trunk must have a clock controller clocked
to an external reference clock.

Note: Clocking slips can occur between systems that are clocked from
different Central Offices (COs), if the COs are not synchronized. The
slips can degrade voice quality.

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311

01.04

Standard

Release 5.0

23 May 2008

Copyright © 2003-2008, Nortel Networks

.

Advertising