Man-machine t1 maintenance interface software, Figure 42 option 11c cabinet, Figure 41 "option 11c – Nortel Networks Circuit Card 311 User Manual
Page 225
Man-Machine T1 maintenance interface software
225
Figure 41
Option 11C Mini chassis or Succession 1.0 MG chassis
3
Use an MGC Breakout Adapter for Option 11C (NTDW63AAE5)
•
Connect the adapter to 25 pairs MDF connector at Slot 0
•
Connect the MGC DECT Clock Reference Cable (NTDW67AAE5)
to 15-pin DSUB connector on the Breakout Adapter.
"Option 11C Cabinet" (page 225)
shows the Option 11C Cabinet.
Figure 42
Option 11C Cabinet
—End—
Man-Machine T1 maintenance interface software
Description
The Man-Machine Interface (MMI) supplies a maintenance interface to a
terminal that provides T1 link diagnostics and historical information. See
"Installation and configuration" (page 188)
for instructions on how to install
the cabling and configure the terminal for the MMI.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
01.04
Standard
Release 5.0
23 May 2008
Copyright © 2003-2008, Nortel Networks
.