Figure 106 msdl states – Nortel Networks Circuit Card 311 User Manual
Page 409
Maintenance
409
Figure 106
MSDL states
A newly configured MSDL automatically enters the manually disabled state.
An operating MSDL can be manually disabled by issuing the
DIS MSDL x
command in LD 37 (step 1 in
Figure 106 "MSDL states" (page 409)
Entering the
DIS MSDL x
command in LD 37 moves the card to manually
disabled status and stops all system communication with the card (step 5 in
Figure 106 "MSDL states" (page 409)
Manually enabled
When the card has been manually disabled, re-enable it with the
ENL MSDL
x
command in LD 37 (step 2 in
Figure 106 "MSDL states" (page 409)
).
System disabled
When the system disables the MSDL card (step 4 in
), it continues to communicate and attempt maintenance
procedures on the card. To stop all system communication with the card,
enter
DIS MSDL x
to disable it (step 5 in
). Otherwise, the system periodically tries to enable the card,
attempting recovery during the midnight routines (step 3 in
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
01.04
Standard
Release 5.0
23 May 2008
Copyright © 2003-2008, Nortel Networks
.