Nortel Networks Circuit Card 311 - Manual (Page 378)

378 NT6D70 SILC Line card
Micro Controller Unit (MCU)
The Micro Controller Unit (MCU) coordinates and controls the operation
of the SILC. It has internal memory, a reset and sanity timer, and a serial
control interface.
The memory consists of 32 K of EPROM which contains the SILC operating
program and 8 K of RAM used to store interface selection and other
functions connected with call activities.
The reset and sanity timer logic resets the MCU.
The serial control interface is an IPE bus used by the MPU to communicate
with the S/T transceivers.
The MCU coordinates and controls the operation of the SILC. It has internal
memory, a reset and sanity timer, and a serial control interface.
The memory consists of 32 K of EPROM which contains the SILC operating
program and 8 K of RAM used to store interface selection and other
functions connected with call activities.
The reset and sanity timer logic resets the MCU.
The serial control interface is an IPE bus used by the MPU to communicate
with the S/T transceivers.
The Micro Controller Unit (MCU) coordinates and controls the operation
of the SILC. It has internal memory, a reset and sanity timer, and a serial
control interface.
The memory consists of 32 K of EPROM which contains the SILC operating
program and 8 K of RAM used to store interface selection and other
functions connected with call activities.
The reset and sanity timer logic resets the MCU.
The serial control interface is an Peripheral Equipment (PE) bus used by the
MPU to communicate with the S/T transceivers.
IPE interface logic
The IPE interface logic consists of a Card-LAN interface, an IPE bus
interface, a maintenance signaling channel interface, a digital pad, and a
clock controller and converter.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.