Nortel Networks Circuit Card 311 User Manual
Page 512
512
NT8D02 and NTDK16 Digital Line cards
digital link. Each digital telephone and associated data terminal is assigned
a separate terminal number (TN) in the system database, for a total of 32
addressable ports per card.
The digital line card contains a microprocessor that provides the following
functions:
•
self-identification
•
self-test
•
control of card operation
•
status report to the controller
•
maintenance diagnostics
Functional description of the NTDK16
The NTDK16 digital line card is equipped with 48 identical units. Each unit
provides a multiplexed voice, data, and signaling path to and from digital
apparatus over a 2-wire full duplex 512 kHz time compression multiplexed
(TCM) digital link. Each digital telephone and associated data terminal is
assigned a separate terminal number (TN) in the system database, for a
total of 96 addressable ports per card. Refer to
The NTDK16 digital line card contains a microprocessor that provides the
following functions:
•
self-identification
•
self-test
•
control of card operation
•
status report to the controller
•
maintenance diagnostics
The card also provides
•
Ability to support Digital sets and the Digital Console M2250
•
Provides a serial link (Card LAN) for status report and maintenance.
•
Supports loop lengths up to 3500 ft. (1.0 km) using 24 AWG wire.
•
Interface between three DS30X loops and 48 TCM lines.
Card interfaces
The digital line card passes voice, data, and signaling over DS-30X loops
and maintenance data over the card LAN link. These interfaces are
discussed in detail in the section
"Intelligent Peripheral Equipment" (page
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
01.04
Standard
Release 5.0
23 May 2008
Copyright © 2003-2008, Nortel Networks
.