Nortel Networks Circuit Card 311 - Manual (Page 117)

QPC841 4-Port Serial Data Interface card 117
Device number SW14
Port 1 Port 2 1 2 3 4 5 6 7 8
12 13 off off off off off off off on
14 15 off off off off off off off off
Note 1: On SW16, positions 1, 2, 3, and 4 must be OFF.
Note 2: To avoid address conflicts, SW14 and SW15 can never show identical settings.
Note 3: To disable ports 1 and 2, set SW14 position 1 to ON.
Device number SW15
Port 3 Port 4 1 2 3 4 5 6 7 8
0 1 off off off off off on on on
2 3 off off off off off on on off
4 5 off off off off off on off on
6 7 off off off off off on off off
8 9 off off off off off off on on
10 11 off off off off off off on off
12 13 off off off off off off off on
14 15 off off off off off off off off
Note 1: On SW16, positions 1, 2, 3, and 4 must be OFF.
Note 2: To avoid address conflicts, SW14 and SW15 can never show identical settings.
Note 3: To disable ports 3 and 4, set SW15 position 1 to ON.
Table 60
QPC841 baud rate
Port 1 SW10 Port 2 SW11 Port 3 SW12 Port 4 SW13
Baud
rate 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
150 off off on on off off on on off off on on off off on on
300 off on off on off on off on off on off on off on off on
600 off off off on off off off on off off off on off off off on
1200 off on on off off on on off off on on off off on on off
2400 off off on off off off on off off off on off off off on off
4800 off on off off off on off off off on off off off on off off
9600 off off off off off off off off off off off off off off off off
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.