Nortel Networks Circuit Card 311 - Manual (Page 584)

584 NT8D14 Universal Trunk card
— maintenance diagnostics
— transmission pad settings
The Universal Trunk Card is equipped with a microprocessor which controls
card operation. The microprocessor also provides the communication
function for the card.
The Universal Trunk Card communicates with the Controller Card through a
serial communication link. Features provided through the link include:
• card-identification
• self-test status reporting
• status reporting to the Controller Card
• maintenance diagnostics
Card LAN interface
Maintenance data is exchanged with the common equipment CPU over a
dedicated asynchronous serial network called the Card LAN link.
Maintenance data is exchanged with the common equipment CPU over a
dedicated asynchronous serial network called the Card LAN link. The card
LAN link is described in
"SDI function" (page 1118) .
Maintenance data is exchanged with the common equipment CPU over a
dedicated asynchronous serial network called the Card LAN link.
Signaling and control
The signaling and control portion of the Universal Trunk card works with
the CPU to operate the card hardware. The card receives messages from
the CPU over a signaling channel in the DS-30X loop and returns status
information to the CPU over the same channel. The signaling and control
portion of the card provides the means for analog loop terminations to
establish, supervise, and take down call connections.
The signaling and control portion of the card provides circuits that establish,
supervise, and take down call connections. These circuits work with the
system CPU to operate trunk interface circuits during calls. The circuits
receive outgoing call signaling messages from the CPU and return incoming
call status information over the DS-30X network loop.
The signaling and control portion of the card provides circuits that establish,
supervise, and take down call connections. These circuits work with the
system CPU to operate trunk interface circuits during calls. The circuits
receive outgoing call signaling messages from the CPU and return incoming
call status information over the DS-30X network loop.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.