Nortel Networks Circuit Card 311 User Manual

Page 967

Advertising
background image

967

NTBK50 2.0 Mb PRI card

Contents

This section contains information on the following topics:

"Introduction" (page 967)

"Physical description" (page 968)

"Functional description" (page 973)

"Architecture" (page 975)

Introduction

The NTBK50 2.0 Mb PRI card provides a 2.0 Mb PRI interface. It supports
the NTAK20 clock controller daughterboard and either the NTAK93
D-channel interface or the NTBK51 Downloadable D-channel handler.
The NTAK93 DCHI daughterboard provides identical performance to the
on-board NTAK79 DCHI. The NTBK51 DDCH daughterboard provides
support for protocols based on the MSDL platform.

You can install this card in slots 1 through 4 in the Media Gateway. The card
is not supported in the Media Gateway Expansion.

ATTENTION

IMPORTANT!

Each Media Gateway that has a digital trunk must clock the clock controller to
an external reference clock.

Note: Clocking slips can occur between systems that are clocked from
different Central Offices (COs), if the COs are not synchronized. The
slips can degrade voice quality.

The NTBK50 card provides a 2Mb PRI interface and is installed in the
main and IP expansion cabinets. The NTBK50 supports the NTAK20
clock controller daughterboard and either the NTAK93 D-Channel interface
or the NTBK51 Downloadable D-Channel handler. The NTAK93 DCHI

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311

01.04

Standard

Release 5.0

23 May 2008

Copyright © 2003-2008, Nortel Networks

.

Advertising