Nortel Networks Circuit Card 311 - Manual (Page 504)

504 NT8D02 and NTDK16 Digital Line cards
Figure 124
Digital line card - faceplate
The NT8D02 Digital Line Card circuitry is mounted on a 31.75 cm by 25.40
cm (12.5 in. by 10 in.) double-sided printed circuit board. The card connects
to the backplane through a 160-pin edge connector.
The faceplate of the NT8D02 Digital Line Card is equipped with a red LED
that lights when the card is disabled. See
Figure 125 "Digital line card -
faceplate" (page 505) . When the card is installed, the LED remains lit for two
to five seconds as a self-test runs. If the self-test completes successfully,
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.