Nortel Networks Circuit Card 311 - Manual (Page 407)

Installation 407
3 Route the cable to the rear of the module next to the I/O panel.
4 Plug the DB25 male connector end of a cable into a DB25 female
connector at the back of the I/O panel.
5 Secure cable connectors in place with their fasteners.
6 Repeat steps 1 through 5 for each connection.
—End—
MSDL planning form
Use the following planning form to help sort and store information
concerning the MSDL cards in your system as shown in the sample. Record
switch settings for unequipped ports as well as for equipped ports.
MSDL data form
Device no. Shelf Slot Card ID Boot Code
version
Date install
ed Last update
Ports Operation Logical no. Switch setting Cable no. Operation information
0
1
2
3
Sample
Device no. Shelf Slot Card ID
13 3 5 NT6D80AA-110046
Boot
Code
version
004
Date instal
led
2/1/93
Last update
5/5/93
Ports Operation Logical no. Switch
setting Cable no. Operation
information
0 TTY 13 RS-232
DCE NTND27AB maint TTY 9600 baud
1 DCH 25 RS-422
DTE NTND26AB PRI 27 to hdqtrs
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.