Nortel Networks Circuit Card 311 - Manual (Page 672)

672 NT8D14 Universal Trunk card
For the RAN machine types, the maximum length of the recorded
announcement is two hours. The meaning of a ground signal received from
the RAN machine (play or idle) is configured in LD 16.
Multi-Channel Level Start/Control Mode (minimum vintage BA) A RAN
mode of operation is available called "Multi-Channel Level Start/Control
Mode." This mode enables provisioning of multiple RAN channels for
a RAN route (playing the same message independently on demand)
cross-connected one-to-one to each RAN trunk in a multi-channel level start
RAN route. Do not bridge RAN trunks in a multi-channel RAN route.
The Route Data Block LD 16 is used to configure a RAN route in
Multi-Channel Level Start/Control mode, using the following response:
RTYP = MLSS
Trunk members are provisioned in the Trunk Data Block LD 14.
Refer to "Programming RAN trunks" (page 675) and to Software
Input/Output Reference — Administration (NN43001-611) for instructions on
service change programs.
A RAN mode of operation is available called "Multi-Channel Level
Start/Control Mode." This mode allows provisioning of multiple RAN
channels for a RAN route (playing the same message independently on
demand) cross-connected one-for-one to each RAN trunk in a multi-channel
level start RAN route. Do not bridge RAN trunks in a multi-channel RAN
route.
The Route Data Block LD 16 is used to configure a RAN route in
Multi-Channel Level Start/Control mode, using the following response:
RTYP = MLSS
Trunk members are provisioned in the Trunk Data Block LD 14.
Refer to "Programming RAN trunks" (page 675) and to Software
Input/Output Reference — Administration (NN43001-611) for more detailed
instructions on service change programs.
A RAN mode of operation is available called "Multi-Channel Level
Start/Control Mode." This mode enables provisioning of multiple RAN
channels for a RAN route (playing the same message independently on
demand) cross-connected one-to-one to each RAN trunk in a multi-channel
level start RAN route. Do not bridge RAN trunks in a multi-channel RAN
route.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.