Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 105)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 105
Electrode ID Name assigned to the electrode (max. 16 alphanumeric characters).
Enter in:
Electrode window > Edit electrode
Electrode
identification An electrode is identified by its name (ID). The ID and other electrode
specifications are entered in the Edit Electrode menu. These other
parameters are :
• Type
• Address
Electrode
library To access, press 4 in Electrode window.
The electrode library comprises the following menus and commands:
Figure 18: Electrode library overview
Electrode not
calibrated The electrode has not been calibrated and there is no electrode data
stored in the archives. Press
✓ and calibrate the electrode.
Electrode
library
New
electrode
Default
parameters
Delete
electrode
Edit electrode
Calibration parameters
Calibration solutions
Results
Commands/
actions
Programming
data
Printouts