Programming methods – Hach-Lange TITRALAB 860_865 Reference Manual User Manual
Page 29
Advertising
Titra
Lab
®
TitraLab 860 and 865 Reference Manual
Page 29
Programming methods
Creating and editing a method
1.
Press 4.
2.
Press 1.
3.
Enter ID.
Press 1 to confirm.
4.
Enter method parameters.
Specify the Mode,
5.
Press 1.
6.
Press
✓ and select the
electrode(s) from the list(s).
Do not forget to select
the same electrode(s)
as the one(s) created in the
reagent calibration method.
Enter the other method param-
eters. Press Esc then 2.
Advertising