Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 125)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 125
Insert method
menu Use this menu to set the ID and the type of method to be inserted
before or between two methods in a sequence. This menu is the same
as Add method,
see "Add method menu", page 46 .
To access:
Press 2 in the Edit sequence menu.
The sequence must contain at least one method.
Install burette The burette must be installed before installing a reagent.
Proceed as follows:
If required, use the burette functions to replace or remove the
installed burette.
Press 7. Press 5.
Enter burette volume and
serial number. Install the burette on the
Titration Manager or the
ABU52 at the address in-
dicated,
see "Address",
page 51 .