Supervisor mode, T˚c minimum/ maximum value, Target titre – Hach-Lange TITRALAB 860_865 Reference Manual User Manual
Page 219: T°c minimum/maximum value, Titra lab
Titra
Lab
®
TitraLab 860 and 865 Reference Manual
Page 219
Supervisor
mode
In SUPERVISOR mode, you can create, select, edit, delete sequence
of methods electrodes and reagents.
To select the Supervisor mode, a supervisor code is required.
Proceed as follows:
•
Press Stop for 3 seconds in the Main window.
•
Enter the Supervisor code.
•
Press 5 Exit
•
Select Return in mode = Supervisor.
Refer to "User’s rights", page 225
.
T°C minimum/
maximum value
If the temperature measured lies outside these limits a warning
message will be displayed.
Enter in:
Edit method > Results (for a measurement method using a
temperature sensor).
Range available:
T°C minimum value: -9 °C to T°C maximum value.
T°C maximum value: T°C minimum value to 100 °C.
Target titre
Approximate value of the reagent titre.
Enter in:
Reagent window > New reagent
Format:
5 characters