Printouts, Titra lab – Hach-Lange TITRALAB 860_865 Reference Manual User Manual
Page 156
Titra
Lab
®
TitraLab 860 and 865 Reference Manual
Page 156
Printouts
Printouts can be initiated automatically at the end of a test or manually
by pressing key Print from the following data screens:
•
Main window: list of available methods.
•
Reagent window: list of available reagents.
•
Electrode window: list of available electrodes.
•
Edit method menu: list of method parameters.
•
Edit reagent menu: list of reagent parameters.
•
Edit electrode menu: list of electrode parameters.
•
GLP - Archives (methods) menu: sample results.
•
GLP - Archives (reagents) menu: reagent calibration results.
•
GLP - Archives (electrodes) menu: electrode calibration results.
•
Sequence/Sample stack menu: sample stack of the sequence (for
each beaker: method type and ID, beaker number and ID).
•
Beaker menu (while preparing a reagent calibration stack):
calibration stack (for each beaker: standard ID and batch number,
beaker number, sample quantity).
•
Beaker menu (while preparing an electrode calibration stack):
calibration stack (for each beaker: buffer ID and batch number,
beaker number).
Automatic printouts
They contain the following information:
•
Header: information entered in the SETUP > Customise menu with
the instrument serial number and the date and time of analysis.
•
Title of report: entered in Printouts menu, during method with the
method name (ID).
•
Analysis ID: User ID and Sample ID entered at the start of the
titration.
•
Footnote: appears automatically at the end of printouts.
•
Calibration data (if relevant): electrode and reagent used to per-
form the titration.
•
The direct curve and/or derivative curve of the titration (if
programmed in the Printouts menu).
•
Titration/measurement results: obtained at the end of the
analysis with printout of the equivalent points (except for reagent
calibration) and an analysis counting number.
In automatic mode, the printout format depend on the High/
Medium/Low option selected for the Detailed parameter.
.