Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 183)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 183
Reprocessing a
reagent
calibration
curve Refer to "Reprocessing a curve", page 179 .
Reset memory An internal error has occurred. Press
✓. The Titration Manager resets
the parameters to default settings. The method, electrode and reagent
lists are reset to the preprogrammed list. All the results are lost.
Reset to factory
settings Use this command to restore the methods, reagents and electrode
menu to factory settings. The method, reagent and electrode user lists
are reset to the preprogrammed lists.
A reset to factory settings is equivalent to a memory reset and
all the results and user entered methods are deleted.
Press 4 in the Setup menu and confirm the reset.