Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 47)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 47
Addition Option available with TitraLab 865 or TitraLab860 with one or two
ABU52 connected.
Select Yes to carry out a reagent addition at the start of the titration or
a reagent calibration. This addition takes place before the titration
starts (predose included).
The reagent is added using a second burette controlled by the Titration
Manager. This second burette can be installed on the Titration
Manager or on an ABU52 connected to the Titration Manager,
see
"ABU1/ABU2", page 43 .
Edit an Addition method when you want to perform 2 or 3
reagent additions successively or simultaneously.
Refer to "Addition method - definition", page 49 .
Use a sample preparation when you want to add a solvent
using a pump installed on a SAC850 or SAC950 Sample
Changer.
Refer to "Sample preparation no.", page 201 .
Enter in:
Edit method > Parameters
Edit reagent > Calibration parameters