Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 225)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 225
User’s rights The Supervisor and Routine modes set the user’s rights as shown in
the table below:
Figure 36: User’s rights
Viewing global
variables 1. Enter the Main window:
2. Press 5 GLP-Archives,
3. Press 2 Global variable
4. Scroll the G1 to G10 global variables using the arrow keys.
Supervisor Routine
Create, edit sequence.
Remove all methods from a sequence.
Delete a sequence Yes Yes (if the
Supervisor
gives the
right to),
see
"Demand:
Unlocked",
page 86
.
Create method, electrode, reagent Yes No
Copy method, electrode, reagent Yes No
Program sequence, method, elec-
trode, reagent Yes No
Delete method, electrode, reagent Yes No
Reset method, electrode, reagent
parameters Yes No
Reset parameters to factory settings Yes No
Select sequence, method, electrode,
reagent Yes Yes
Check method, electrode, reagent
parameters Yes Yes
Install/replace/remove reagents Yes Yes
Connect/replace/disconnect elec-
trodes Yes Yes
Run sequence, method, electrode and
reagent calibrations Yes Yes
Consult results Yes Yes