Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 149)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 149
pH0(25) This is the pH of the solution at 25°C at which the measured electrode
potential is equal to zero. The potential developed depends on both
electrodes; the reference and the glass. These potentials may vary to
bring about an electrode drift. This drift can be compensated by fre-
quent calibrations.
Normally the following ranges are used by default (6.850 pH and
7.200 pH)
Enter in:
Edit electrode > Results
Range available:
pH(0)25 min. = 0.000 pH to pH0(25) max.
pH0(25) max. = pH0(25) min. to 14.000 pH
pH buffer Refer to "Solution menu", page 210 .
pH calibration
results
parameters Refer to "Results menu", page 188 .
pH calibration
solutions
parameters Refer to "Solution menu", page 210 .